Extron-electronics MLC 206 AAP EC User Guide Manuale Utente Pagina 14
- Pagina / 72
- Indice
- SEGNALIBRI
Valutato. / 5. Basato su recensioni clienti
Installation, cont’d
MediaLink Controllers • Installation2-6
Rear/bottom panel cable connections
MLC 206 rear view
MLC 206 bottom view
1
Configuration port — This port is used for system configuration and for
loading control files into the MLC. Connect a host computer, third party
control system, or a terminal such as a personal digital assistant to the MLC
via this rear panel 9-pin HD female RS-232 connector. Commands and drivers
can be downloaded into or uploaded from the MLC via this port. See chapter
four for details about the setup software and downloading drivers.
Display (projector) and source control connections
2
IR Display/Source Control connector — Infrared control signals are sent to
A/V devices via accessories connected to this port. Connect Extron
IR Emitters or an IR Broadcaster to this 3.5 mm, 5-pole direct insertion captive
screw connector so display and/or source devices can be controlled via
infrared commands from the MLC. Up to four IR Emitters can be connected
to the MLC via this connector at one time. Wire the connector as shown in the
following illustrations.
MLC
IR control
port
For the IR Emitter only
IR
Emitter
White striped wire only
A
BCDE
IR
Modulated IR
Ground
110 feet (33.5 m) maximum
Connect
up to 4 IR
Emitters
(max.).
D
A
1
3 42 6 75
Place the head of each IR Emitter
over or directly adjacent to the
controlled device’s IR receiver.
- MLC 206, MLC 206 AAP 1
- MLC 206 EC, MLC 206 AAP EC 1
- Precautions 2
- Table of Contents 3
- Table of Contents, cont’d 4
- Chapter One 5
- Introduction 6
- Controller 7
- Audio Amp 7
- MLA-RemoteIR Link 7
- Introduction, cont’d 8
- Chapter Two 9
- Installation 10
- Installation Procedures 11
- Installation, cont’d 12
- Replacing labels 13
- Receive (Rx) 15
- Clear to send (CTS) 15
- Request to send (RTS) 15
- Ground ( ) 15
- Transmit (Tx) 15
- MLC 206 to a control module 17
- MLC 206 to an IR Link 17
- Connecting an MLC 206 19
- Tally Out 21
- Detail A 23
- Detail B 23
- Euro Channel 25
- Backing Plate 25
- Chapter Three 27
- Operation 28
- Button Command 29
- Operation, cont’d 30
- Chapter Four 33
- Serial Communication 34
- Volume adjustment 36
- Audio mute (overall) 36
- (host to MLC) (MLC to host) 36
- (A x 16) + (B) = 38
- = (3 x 16) + (4) = 52 39
- Control Software for Windows 41
- Serial Communication, cont’d 42
- Switcher (MLS) Config 43
- MediaLink Controller 46
- Key to file names 57
- Appendix A 61
- (7.4x-082202-D3x 62
- Part Numbers and Accessories 63
- Appendix B 65
- Dimensions 66
- To install the controller 67
- a wall box 67
- MLC 206 AAP Cutout Template 68
- Firmware replacement 69
- 33-644-01 A 70
- Printed in the 70
- Align Notches 70
- FCC Class A Notice 71
- Extron’s Warranty 71
- Extron Electronics, USA 72
- Extron Electronics, Europe 72
- Extron Electronics, Asia 72
- Extron Electronics, Japan 72
Prodotti e manuali riguardandi Hardware Extron-electronics MLC 206 AAP EC User Guide
(74 pagine)Sony Akcesoria TV podręczniki użytkownika
Zaczynanie od N
Commenti su questo manuale