Extron-electronics IPL M PDP-ES User Guide Manuale Utente Pagina 3
- Pagina / 36
- Indice
- RISOLUZIONE PROBLEMI
- SEGNALIBRI
Valutato. / 5. Basato su recensioni clienti
IPL M PDP-ES • Quick Start Guide
QS-1
To install and set up the IPL M PDP-ES interface card, follow
these steps:
Step 1
Turn all of the equipment off and disconnect it from the power
source.
Step 2
Remove the preinstalled Pioneer communication ES card from the
Pioneer plasma. Refer to Removing the Pioneer communication ES card
in chapter 2 for more information.
Step 3
Install the Extron IPL M PDP-ES interface card into the Pioneer
plasma. Refer to Installing the Extron IPL M PDP-ES card in chapter 2
for more information.
Step 4
Affix the Extron IPL M PDP-ES sticker label to the display, covering
the existing Pioneer label.
Step 5
Attach the network (LAN) cable to the LAN port of the
IPL M PDP-ES interface card installed in the Pioneer plasma. Attach
the other end to a switch, hub, router, or a host PC, as shown below.
See Ethernet/LAN port in chapter 3 for more information on this
connection.
IPL M PDP-ES
ACT LINK
RESET
LAN
RS-232
Extron
IPL M PDP-ES
Pioneer Plasma Ethernet Card
Extron
MLC 206
MediaLink Controller
PC
RS-232
LAN
MLC 206
DISPLAY
POWER
VOLUME
MAX/
MIN
VCR DVD Laptop
Quick Start Guide — IPL M PDP-ES
- IPL M PDP-ES 1
- FCC Class A Notice 2
- Precautions 2
- Table of Contents 4
- Chapter One 5
- Introduction 6
- Chapter Two 7
- Installation and Operation 8
- Panel Features and Cabling 9
- Operation 10
- Chapter Three 11
- Connection and Configuration 12
- Configuring the Hardware 12
- Connecting the Hardware 12
- Chapter Four 15
- Communication and Control 16
- 4-10 4-11 20
- 4-12 4-13 21
- 4-14 4-15 22
- Esc CZ WCZ 27
- 4-274-26 28
- 4-294-28 29
- Troubleshooting 30
- Appendix A 31
- Specifications 32
- Appendix B 33
- Glossary 34
- Glossary, cont’d 35
Prodotti e manuali riguardandi Hardware Extron-electronics IPL M PDP-ES User Guide
(2 pagine)Sony Akcesoria TV podręczniki użytkownika
Zaczynanie od N
Commenti su questo manuale