Extron-electronics HDMI 101 Plus User Guide Manuale Utente Scaricare il pdf (Pagina 9)

Panel Features,

Connections, and

Setup

This section describes the features and connections of the front and rear panels of the

HDMI 101 Plus and how to set up the unit.

HDMI 101 Plus Front and Rear Panel Features and Connections

Front Panel Features and Connections

HDMI INPUT

HDMI 101 Plus

POWER

12V

0.2A MAX

HDMI OUTPUT

Figure 2. HDMI 101 Plus Front Panel

a Power and signal status LED — This LED is dual colored. It lights amber when power is

connected and lights green when there is an active HDMI input.

NOTE: If power is provided by the source device, the LED will light amber.

b HDMI Input — Plug the cable from the input source device into this

female HDMI type A connector. Secure the HDMI connector to the

HDMI 101 Plus with the LockIt

™

HDMI lacing bracket provided (see the

LockIt HDMI Lacing Bracket Installation Guide at www.extron.com).

The wiring of the connector follows the HDMI single link format.

The diagram to the right and the table below show the HDMI pin

conﬁguration.

Pin Signal Pin Signal Pin Signal

1 TMDS data 2+ 7 TMDS data 0+ 13 CE control

2 TMDS data 2 shield 8 TMDS data 0 shield 14 Reserved (NC)

3 TMDS data 2- 9 TMDS data 0- 15 SCL

4 TMDS data 1+ 10 TMDS clock+ 16 SDA

5 TMDS data 1 shield 11 TMDS clock shield 17 DDC/CEC ground

6 TMDS data 1- 12 TMDS clock- 18 +5 V power

19 Hot plug detect

HDMI

Type A Receptacle

18 2

HDMI 101 Plus • Panel Features 3

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 17 18

Nessun commento

Extron-electronics HDMI 101 Plus User Guide Manuale Utente Pagina 9