Extron electronics MEDIALINK MLC 52 Istruzioni per gli Interventi Pagina 62
- Pagina / 124
- Indice
- SEGNALIBRI
Valutato. / 5. Basato su recensioni clienti
MLC 52 Series MediaLink Controllers • Serial Communication5-2
Serial Communication
The MLC 52 can be remotely configured via a host computer connected to the
front panel configuration port. Through this port, you can program the MLC’s
buttons with commands by using the Windows
®
-based configuration software
(MLC 52/DVCM 50 Configuration Program). You can also issue certain SIS
™
(Simple Instruction Set) commands through this port. The optional 9-pin D to
2.5 mm stereo mini TRS RS-232 configuration cable (part #70-335-01) can be used
for this connection.
The connector has the following pin assignments:
5
1
9
6
Sleeve (Gnd)
Ring
Tip
9-pin D Connection TRS Plug
Pin 2 Computer's RX line Tip
Pin 3 Computer's TX line Ring
Pin 5 Computer's signal ground Sleeve
RS-232 configuration cable pin assignments
The MLC 52 uses the following protocol:
9600 baud
8 bits
1 stop bit
Parity: none
Flow control: none
Using the MLC 52 Configuration Program
To perform advanced configuration tasks (e.g., setting button modes, updating
firmware, adding display device drivers), you must use the included Extron
Windows-based configuration software. Many items in the MLC 52
Configuration program are also accessible via front panel controls described in
chapter 3, “Operation.” Refer to that chapter for details on features and settings.
Some features are available only via this configuration program. The MediaLink
Help Program provides information on settings and on how to use the
configuration program itself.
To install and run the MLC 52 configuration software, ensure that your PC meets
the following system requirements:
• Microsoft
®
Windows 2000 or later
• Pentium III or better processor (or compatible)
• 32 MB free hard disk space
• Microsoft
®
Internet Explorer
©
4.0 or above
• 4x or higher CD-ROM player
• Minimum 1024 x 768 screen resolution
Extron’s Windows-based configuration software is provided on a CD, which is
packaged with the MLC. The program can also be downloaded from the Extron
Web site (http://www.extron.com). Install this software on your computer.
- MLC 52 Series 1
- Precautions 2
- Table of Contents 3
- Table of Contents, cont’d 4
- Chapter One 7
- Introduction 8
- Options and accessories 9
- Introduction, cont’d 10
- Chapter Two 11
- Installation 12
- UL Requirements 13
- Installation Procedures 13
- Installation, cont’d 14
- Replacing button labels 15
- Wiring for IR control 21
- MLC 52 or MLC 52 VC 23
- IR 452 Remote 23
- Wiring the power connector 25
- Wiring the VC port 25
- Wall Mounting Bracket 27
- Chapter Three 29
- Operation 30
- MLC 52 IR and RS 31
- Operation, cont’d 32
- Receiving MLC 33
- > VCR 35
- Setting up button macros 37
- Amplifiers 39
- Selecting Inputs 41
- Chapter Four 45
- Special Applications 46
- COMPUTER 47
- Special Applications, cont’d 48
- Projector Remote Type A 49
- Confirmation 51
- Multi-coded IR Functionality 53
- Projector Remote Type B 59
- Chapter Five 61
- Serial Communication 62
- Installing the software 63
- Loading Extron drivers 65
- Key to file names 69
- Displaying the Help program 83
- Serial Communication, cont’d 100
- 4 to 14” 101
- (10 to 36 cm) 101
- Projector Remote 101
- Using emulation mode 103
- Resetting 107
- Updating the firmware 109
- ) Commands 111
- Upload firmware 113
- Appendix A 115
- Specifications 116
- Part Numbers and Accessories 117
- Optional accessories 118
- Appendix B 119
- 2.91" 120
- (7.40 cm) 120
- MLC 52 VC 121
- Templates, cont’d 122
- FCC Class A Notice 123
- Extron’s Warranty 123
Prodotti e manuali riguardandi Proiettori dati Extron electronics MEDIALINK MLC 52
(12 pagine)
Küppersbusch IG6504.1E-CN podręczniki
Instrukcje obsługi i podręczniki użytkownika dla Nie Küppersbusch IG6504.1E-CN.
Dostarczamy 3 pdf podręczników Küppersbusch IG6504.1E-CN do pobrania za darmo według typów dokumentów: Instrukcja Użytkownika
Commenti su questo manuale