Extron-electronics Annotator User Guide Manuale Utente Scaricare il pdf (Pagina 62)

X13&

= Data bits: 7, 8 (default = 8)

X13*

= Stop bits: 1, 2 (default = 1)

X13(

= Serial port type: 0 = RS-232, 1 = RS-422

X14)

= Flow control (only the rst letter is needed): H = hardware, S = software, N = none

X14!

= Data pacing (time between bytes) in miliseconds, 0000 - 1000 (default = 0000 = 0 ms).

X14@

= IP connection time-out period 1 - 65000, in 10-second steps

(default = 30 = 300 seconds). If no data is received during the specied period, the

Ethernet connection closes. Responses are returned with leading zeros.

X14#

= Redirection status: 0 = no redirection, 1 - 3 = redirect serial communication from the

specied port (1 = COM1, 2 = COM2, or 3 = COM3) to allow a serial pass-through

mode.

NOTE: COM1 is rear panel bottom port, COM2 is front panel cong port, COM3 is

rear panel top port

X14$

= Time-out period in tens of milliseconds for serial data pass-through mode, after

which event data can be inserted into the transmit buffer and the serial port is

released to another source, range = 1 - 32767 (default = 10 = 100 ms).

Annotator • SIS Communication and Control 56

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 107 108

Nessun commento

Extron-electronics Annotator User Guide Manuale Utente Pagina 62